Using Circle Mode with Bluetooth i-Pilot Link (2017-2023)

Circle Mode uses a Humminbird fish finder to set a point to navigate around. Once a point is set, the boat can navigate either clockwise or counterclockwise around the set point in a circle. The radius of the circle can be changed from 30 to 500 feet. Circle Mode cannot be activated from the i-Pilot Link remote, but the direction of travel, radius of the circle can be adjusted, and the function can be disengaged using the i-Pilot Link remote. See the Humminbird manual to learn more about Circle Mode.

Notice_Circle_Mode_is_an.png
Circle_Mode.png
Warning-_watch_for_a_turning_propeller.png

Change the Radius of Circle Mode
Notice-_the_radius_can_be_set.png

  1. When Circle Mode is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Circle Mode Active Band.
    Change_Radius_1a.png
  2. Select the Circle Mode Active Band using your finger or by pressing the Ok button.
  3. In the Circle Mode Control Screen, find the Add 5 button or Minus 5 button. Select the button to move the Radius in the corresponding direction.
    Change_Radius_1c.png
  4. Once the desired Radius is found, press the Home button to exit the menu

Reverse Direction with Circle Mode

  1. When Circle Mode is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Circle Mode Active Band.
    Reverse_1a.png
  2. Select the Circle Mode Active Band using your finger or by pressing the Ok button.
  3. Select the Reverse Reverse button from the Circle Mode Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.
    Reverse_1c.png
  4. The direction of the Boat will reverse on the Circle Mode Active band.
    Reverse_2d.png

Disengage Circle Mode
Notice-_Circle_mode_will_also_be_disengaged.png

  1. When Circle Mode is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Circle Mode Active Band.
    Reverse_2d.png
  2. Select the Circle Mode Active Band using your finger or by pressing the Ok button.
  3. Select the Cancel Cancel button from the Circle Mode Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.
    Reverse_1c.png
Was this article helpful?
3 out of 4 found this helpful

Articles in this section

See more