Using Follow the Contour with Bluetooth i-Pilot Link (2017-2023)

Follow the Contour allows you to navigate a contour on a Humminbird LakeMaster chart or AutoChart ZeroLine chart. When starting i-Pilot Link navigation to Follow the Contour, all other types of navigation are stopped on the Fishfinder and the Ethernet network. The boat can navigate either clockwise or counterclockwise around the contour. The Offset from the contour can range from -300 to +300 feet. Follow the Contour cannot be activated from the i-Pilot Link remote, but the direction of travel, offset, and the function can be disengaged using the i-Pilot Link remote. See the Humminbird manual to learn more about Follow the Contour. If using an AutoChart ZeroLine Map Card, see the AutoChart ZeroLine Map Card Accessory Manual for more information.

Notice-_follow_rhe_contour_is.png
Follow_Contour.png
Warning-_watch_for_a_turning_propeller.png

Change the Offset with Follow the Contour
Notice-_when_setting_the_offset.png
Notice-_Cruise_Control_can_be_used.png

  1. When Follow the Contour is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Follow the Contour Active Band.
    change_offset_1a.png
  2. Select the Follow the Contour Active Band using your finger or by pressing the Ok button.
  3. In the Follow the Contour Control Screen, find the Add 1 Add 1 button or Minus 1 Minus 1 button. Select the button to move the Offset in the corresponding direction.
    change_offset_1c.png
  4. Once the desired Offset is found, press the Back Back button or the Home button to exit the menu.

Reverse Direction with Follow the Contour

  1. When Follow the Contour is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Follow the Contour Active Band.
    Reverse_direction_1a.png
  2. Select the Follow the Contour Active Band using your finger or by pressing the Ok button.
  3. Select the Reverse Reverse button from the Follow the Contour Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.
    Reverse_direction_1c.png

Disengage Follow the Contour
Notice-_manually_steering_the_motor.png

  1. When Follow the Contour is engaged, scroll through the Content Area using either your finger or the Screen Navigation button to find the Follow the Contour Active Band.
    Disengage_1a.png
  2. Select the Follow the Contour Active Band using your finger or by pressing the Ok button.
  3. Select the Cancel Cancel button from the Follow the Contour Control Screen using your finger or by scrolling to it with the Screen Navigation button and pressing the Ok button to select it.
    Disengage_1c.png
Was this article helpful?

We're sorry to hear that.

Please tell us why.

4 out of 10 found this helpful

Articles in this section

See more