This video will show you the steps of how to inspect and troubleshoot a Minn Kota Ulterra that will not deploy or respond - no error tone is audible.
*This video is shown on Minn Kota Ulterra models that were built after 2017 (Bluetooth-enabled).
*Note: These instructions do not apply to the Ulterra QUEST nor the Riptide Instinct QUEST.
Key times in the video:
- 2:10 #3 Phillips Screwdriver
- 2:16 3/16 Allen Wrench
- 3:01 Do not use grease
- 3:04 Clean with a water-based silicone