This video will show you how to fill the pump reservoir and bleed the hydraulic lines on Minn Kota Raptor shallow water anchors.
- Click here to learn more about Raptor
- Previous Step: How to Install Raptor™ Hydraulic Hoses and Power Connection
- Next Step: How to Pair Two Raptor™ Shallow Water Anchors Together
Key times in the video:
- 0:00 Filling the hydraulic reservoir and bleeding the hydraulic lines
- 0:48 remove the hydraulic oil fill cap from the reservoir
- 0:54 pour enough fluid into the reservoir
- 1:09 place the fill cap back on the reservoir
- 1:48 continue to add more fluid back into the reservoir
- 2:22 complete the bleeding of the hydraulic lines
- 2:45 check the reservoir
