Video Guide: Minn Kota Ultrex Installation Overview

This video will walk you through the basics of installing a Minn Kota Ultrex trolling motor.

*This video is meant to be a supplement to the official trolling motor installation instructions and precautions. Please refer to those instructions for complete steps. (See Links Below)

Key times in the video:

  • 0:00 Introduction, Tools Needed & Manual
  • 1:30 Mounting the Motor Assembly to the Motor Base (Mono Arm)
  • 5:15 Mounting the Trolling Motor to the Bow
  • 10:34 Installing Lift Assist Cylinder
  • 12:16 Installing the Prop
  • 13:29 Mounting the Stabilizer Bar
  • 16:30 Cable Management
  • 19:16 Wiring the Trolling Motor
  • 23:16 Installing the Heading Sensor
  • 28:15 Pairing the Heading Sensor
  • 29:08 Connecting i-Pilot Link and Sonar
  • 33:16 Closing

Was this article helpful?
27 out of 31 found this helpful

Articles in this section