Using iTracks with Advanced GPS Navigation (2023-present)

The Advanced GPS Navigation system can be used to record sets of points that make up an iTrack. When recording an iTrack, the Advanced GPS Navigation system starts to record GPS position data in the form of Track Points. The very first Track Point recorded is called the Start, and the last point recorded is called the End. The system sees a recorded series of Track Points as an iTrack. iTracks can be recorded and navigated. When the Go To iTrack Button is pressed, an iTrack can be navigated To Start or To End. The system will navigate to the nearest Track Point and then navigate to the Start or End as requested. Once the nearest Track Point is reached, it will then follow the Track Points in sequence back to either the Start or End based on the selection made. Once the Start or End is reached, the system automatically transitions to the set Arrival Mode. During iTrack navigation, the Advanced GPS Navigation system takes control over all steering functions; speed can be manually controlled or the Cruise Control function can also be used. The motor speed must be set high enough in order to stay on the track given wind, current and other external forces.

• Recording an iTrack Using the OBN Button
• Recording an iTrack Using the Menu Button
• Go To a Saved iTrack Using the OBN Button
• Go To a Saved iTrack Using the Menu Button
• Disengage Go To iTrack
• Reverse Go To iTrack

Recording an iTrack Using the OBN Button

Recording an iTrack is the default OBN 3 button. If the default is changed, it needs to be reprogrammed to access this feature. See the "One-Boat Network" section of this manual to learn more.

1. Press the OBN 3 button.
2. A banner will appear at the bottom of the screen for three seconds that displays "Recording iTrack."
   
3. The Record icon will appear on the Dashboard.
   
   
   
4. Engage the Prop and manually navigate the desired course.
5. To Save the recording, press the OBN 3 button again.
6. The Save iTrack Screen will appear. Use the Speed Up or Speed Down button to select Save or Cancel. Make the selection by pressing the Steer Right button.
   
7. A banner will appear at the bottom of the screen for three seconds that displays iTrack Saved.
   
   
   

Recording an iTrack Using the Menu Button

1. Press the Menu button.
2. Use the Speed Up or Speed Down button to find My Data, and select it by pressing the Steer Right button.
   
3. In the My Data Menu, use the Speed Up or Speed Down button to find Record iTrack. Press the Steer Right button to select it.
   
4. The Record icon will appear on the Dashboard.
   
   
   
5. Engage the Prop and manually navigate the desired course.
6. To Save or Stop the recording, press the Menu button.
7. Use the Speed Up or Speed Down button to find Stop iTrack, and select it by pressing the Steer Right button.
   
8. The Save iTrack Screen will appear. Use the Speed Up or Speed Down button to select Save or Cancel, and make the selection by pressing the Steer Right button.
   
9. A banner will appear at the bottom of the screen for three seconds that displays iTrack Saved.
   
   
   

Go To a Saved iTrack Using the OBN Button

Go To is the default for the OBN 2 button. If the default is changed, please see the "One-Boat Network" section of this manual to reprogram the button if desired.

1. Manually navigate the boat to within a quarter mile of the saved iTrack.
2. Press the OBN 2 button.
3. Use the Speed Up or Speed Down button to find iTracks, and select it by pressing the Steer Right button.
   
   
4. A list of iTracks that are within a quarter mile will appear. Use the Speed Down and Speed Up buttons to scroll through the list of iTracks to find an iTrack to navigate to and select it by pressing the Steer Right button.
   
5. Use the Speed Down and Speed Up buttons to determine to navigate To Start or To End and select a choice by pressing the Steer Right button.
   
6. The iTrack Active Band will appear in the Dashboard and the boat will start to navigate the selected course.
   
   

Go To a Saved iTrack Using the Menu Button

1. Manually navigate the boat to within a quarter mile of the saved iTrack.
2. Press the Menu button.
3. Select the Go To menu by pressing the Steer Right button.
   
4. Use the Speed Up or Speed Down button to find iTracks, and select it by pressing the Steer Right button.
   
5. A list of iTracks that are within a quarter mile will appear. Use the Speed Down and Speed Up buttons to scroll through the list of iTracks to find an iTrack to navigate to and select it by pressing the Steer Right button.
   
6. Use the Speed Down and Speed Up buttons to determine to navigate To Start or To End and select your choice by pressing the Steer Right button.
   
7. The iTrack Active Band will appear in the Dashboard and the boat will start to navigate the selected course.
   
   

Disengage Go To iTrack

1. When Go To iTrack is engaged, press the Menu button.
   
2. Select Cancel Navigation by pressing the Steer Right button.
   
3. The Go To iTrack Active Band will disappear from the Dashboard.

Reverse Go To iTrack

1. When Go To iTrack is engaged, press the Menu button.
2. Use the Speed Up or Speed Down button to scroll to Reverse Navigation, and select it by pressing the Steer Right button