Using Go To with Spot-Lock, Waypoints, and iTracks with Advanced GPS Navigation (2023-present)

Go To allows you to select a saved Spot-Lock, Waypoint or iTrack and have the motor navigate you there.

• Go To a Saved Spot-Lock
• Disengage Go To Spot-Lock
• Go To a Saved Waypoint
• Disengaging Go To Waypoint
• Go To a Saved iTrack Using the OBN Button
• Go To a Saved iTrack Using the Menu Button
• Disengage Go To iTrack
• Reverse Go To iTrack

Go To a Saved Spot-Lock

1. Manually navigate the boat to within a quarter mile of the saved Spot-Lock location.
2. Press the Menu button.
3. Select the Go To menu by pressing the Steer Right button.
   
4. Select Spot-Locks by pressing the Steer Right button.
   
5. A list of Spot-Locks that are within a quarter mile will appear. Use the Speed Up and Speed Down buttons to scroll through the list of Spot-Locks to find a Spot-Lock to navigate to. Select it by pressing the Steer Right button.
   
   
   
6. The Go To Spot-Lock Active Band will appear on the Dashboard until the Spot-Lock has been reached.
   

Disengage Go To Spot-Lock

1. While Go To Spot-Lock is engaged, press the Menu button.
2. Select Cancel Navigation by pressing the Steer Right button.
   
3. The Go To Spot-Lock Active Band will disappear from the Dashboard

Go To a Saved Waypoint

1. Manually navigate the boat to within a quarter mile of the saved Waypoint.
2. Press the Menu button.
3. Select the Go To menu by pressing the Steer Right button.
   
4. Select Waypoints by pressing the Steer Right button.
   
   
5. A list of Waypoints that are within a quarter mile will appear. Use the Speed Down and Speed Up buttons to scroll through the list of Waypoints to find a Waypoint to navigate to and select it by pressing the Steer Right button.
   
6. The Waypoint Active Band will appear in the Dashboard.
   
   
   
   

Disengaging Go To Waypoint

1. When Go To Waypoint is engaged, press the Menu button.
2. Select Cancel Navigation by pressing the Steer Right button.
   
3. The Go To Waypoint Active Band will disappear from the Dashboard.

Go To a Saved iTrack Using the OBN Button

1. Manually navigate the boat to within a quarter mile of the saved iTrack.
2. Press the OBN 2 button.
3. Use the Speed Up or Speed Down button to find iTracks, and select it by pressing the Steer Right button.
   
4. A list of iTracks that are within a quarter mile will appear. Use the Speed Down and Speed Up buttons to scroll through the list of iTracks to find an iTrack to navigate to and select it by pressing the Steer Right button.
   
5. Use the Speed Down and Speed Up buttons to determine to navigate To Start or To End and select a choice by pressing the Steer Right button.
   
6. The iTrack Active Band will appear in the Dashboard and the boat will start to navigate the selected course.
   
   

Go To a Saved iTrack Using the Menu Button

1. Manually navigate the boat to within a quarter mile of the saved iTrack.
2. Press the Menu button.
3. Select the Go To menu by pressing the Steer Right button.
   
4. Use the Speed Up or Speed Down button to find iTracks, and select it by pressing the Steer Right button.
   
5. A list of iTracks that are within a quarter mile will appear. Use the Speed Down and Speed Up buttons to scroll through the list of iTracks to find an iTrack to navigate to and select it by pressing the Steer Right button.
   
6. Use the Speed Down and Speed Up buttons to determine to navigate To Start or To End and select your choice by pressing the Steer Right button.
   
7. The iTrack Active Band will appear in the Dashboard and the boat will start to navigate the selected course.
   
   

Disengage Go To iTrack

1. When Go To iTrack is engaged, press the Menu button.
   
2. Select Cancel Navigation by pressing the Steer Right button.
   
3. The Go To iTrack Active Band will disappear from the Dashboard.

Reverse Go To iTrack

1. When Go To iTrack is engaged, press the Menu button.
2. Use the Speed Up or Speed Down button to scroll to Reverse Navigation, and select it by pressing the Steer Right button