Using Follow the Contour with Advanced GPS Navigation (2023-present)

Follow the Contour allows you to navigate a contour on all Humminbird LakeMaster, CoastMaster, and AutoChart ZeroLine charts. When starting Advanced GPS Navigation to Follow the Contour, all other types of navigation are stopped on the fish finder and the Ethernet network. The boat can navigate either clockwise or counterclockwise around the contour. The Offset from the contour can range from -300 to +300 feet. Follow the Contour cannot be activated from the Wireless Remote, but the direction of travel, the contour offset, and disengaging the function can be performed using the Wireless Remote. See the Humminbird manual to learn more about Follow the Contour. If using an AutoChart ZeroLine Map Card, see the AutoChart ZeroLine Map Card Accessory Manual for more information.

• Change the Offset with Follow the Contour
• Reverse Direction with Follow the Contour
• Disengage Follow the Contour

Change the Offset with Follow the Contour

1. When Follow the Contour is engaged, the Follow Active Band will be displayed on the Dashboard.
   
2. Press the Menu button.
3. Use the Speed Up or Speed Down button to find Contour Offset, and select it by pressing the Steer Right button.
   
4. Use the Speed Up or Speed Down button to adjust the Contour Offset.
5. With the desired offset selected, press and hold the Menu button to return to the Dashboard.
   
   

Reverse Direction with Follow the Contour

1. When Follow the Contour is engaged, the Follow Active Band will be displayed on the Dashboard.
   
2. Press the Menu button.
3. Use the Speed Up or Speed Down button to find Reverse Navigation, and select it by pressing the Steer Right button.
   
4. The display screen will return to the Dashboard and the trolling motor direction will be reversed.

Disengage Follow the Contour

1. When Follow the Contour is engaged, the Follow Active Band will be displayed on the Dashboard.
   
2. Press the Menu button.
3. Use the Speed Up or Speed Down button to find Cancel Navigation, and select it by pressing the Steer Right button.
   
4. The display screen will return to the Dashboard, and the Follow Active Band will no longer be displayed on the Dashboard.