Your trolling motor may have Built-In MEGA Imaging or Universal Sonar 2, and may include i-Pilot Link. These features require cables to be connected to a fishfinder. The cables, if present, exit the control head from the bottom. To identify the cables present, refer to the diagrams below that detail what the Built-In MEGA Imaging, Universal Sonar and i-Pilot Link cable connectors look like.
- If one cable is coming out of the Control Head on the motor
- If two cables are coming out of the Control Head on the motor
- Compatibility
If one cable is coming out of the Control Head on the motor
-
i-Pilot and Universal Sonar 2, the cable will have 4 pins and be for the Universal Sonar 2
-
i-Pilot and Built-in MEGA Down Imaging, the cable will have 14 pins and be for the MEGA Down Imaging
- i-Pilot and Built-in MEGA Down/Side Imaging, the cable will have 14 pins and be for the MEGA Down/Side Imaging
- ONLY Universal Sonar
NOTICE: The i-Pilot system does not have an external wired connection.
If two cables are coming out of the Control Head on the motor
-
i-Pilot Link and Universal Sonar 2, the 8 pin cable is for the i-Pilot Link, the 4 pin cable is for the Universal Sonar 2
-
i-Pilot Link and Built-in MEGA Down Imaging, the 8 pin cable is for the i-Pilot Link, the 14 pin cable is for the Built-in MEGA Down Imaging
- i-Pilot Link and Built-in MEGA Down/Side Imaging, the 8 pin cable is for the i-Pilot Link, the 14 pin cable is for the Built-in MEGA Down/Side Imaging
Compatibility
Click on the links below for fishfinder compatibility charts for these technologies.
