Bluetooth Talon Basic Troubleshooting

Please see the following list of troubleshooting tips for Bluetooth-enabled Talon Shallow Water anchors:

  1. Try Again
    If your device fails to pair properly try the pairing process again.
  2. Cycle Power:
    Cycle the power to the Talons by turning off and on the master switch (if wired to one) or by pulling out the inline fuse and then reinserting it. After power is restored try the paring process again.
  3. Other Apps:
    Close any other apps that may be open and running in the background.
  4. Clear Paired Devices:
    Clear all paired devices from the Talon and remote and start the pairing process over.Click here to learn how to clear paired devices.

Was this article helpful?
4 out of 49 found this helpful

Articles in this section

See more