Using Go To Spot Lock with i-Pilot

mceclip0.png

What is Go To Choose any Spot-Lock or iTrack that you want to return to, and Go To will activate your motor to take you back there automatically.

Due to safety reasons, i-Pilot will not re-engage a saved Spot-Lock location greater than a quarter mile away.

You can also learn about Spot Lock and Spot Lock Jog by clicking the links below.

Using Go To with i-Pilot

  1. Manually navigate the boat to within a quarter mile of the saved Spot-Lock location.
  2. Press the GO TO IP-Go_To.pngbutton on the remote.
    mceclip1.png
  3. The Spot-Locks menu will appear on the display screen. Use the Menu Up IP-Up.png and Menu DownIP-Down.png buttons to scroll to a saved Spot-Lock location in the menu.
    mceclip2.png
  4. Press the Ok IP-Ok.png button to select a saved Spot-Lock location.
    mceclip3.png
Was this article helpful?
3 out of 4 found this helpful

Articles in this section

See more