View Current Software Version for Bluetooth Talon, Bluetooth Raptor, Advanced GPS Navigation, Bluetooth and Legacy i-Pilot Link, and Bluetooth i-Pilot

Minn Kota recommends that you always run the most current software available for your product. Check the list below to see what the most recent software is for your i-Pilot, i-Pilot Link, Talon, or Raptor. If you aren't running the most current version, you can click here to find instructions on how to update your software. Instructions on viewing your current software is listed below.

This article will assist you in checking the current software version for:

Talon (Bluetooth®) Software Revisions

Manufacture Date: 2017 - present

Raptor (Bluetooth®) Software Revisions

Manufacture Date: 2020 - Present

Advanced GPS Navigation Software Revisions

Manufacture Date: 2023 - Present

One-Boat Network App (2023-current)

Manufacture Date: 2023 - Present

i-Pilot Link (Bluetooth®) Software Revisions

Manufacture Date: 2017 - 2022

i-Pilot (Bluetooth®) Software Revisions

Manufacture Date: 2017 - 2022

i-Pilot Link (non-Bluetooth) Software Revisions

Manufacture Date: 2010-2016

Viewing your current software version

  • Talon
    The current software version on your Talon can be viewed from the Android or iOS phone app.
    1. Install the Talon app on your iOS or Android phone and pair your phone (click here for instructions on installing and pairing the app)
    2. Once paired, tap on menu in the Talon app.
    3. Tap on Software Update and you will be able to view the current software version on your Talon(s) and the Talon App.
  • Raptor
    The current software version on your Raptor can be viewed from the Android or iOS phone app.
    1. Install the Raptor app on your iOS or Android phone and pair your phone (go to page 57 of the Raptor Manual for instructions on installing and pairing the app).
    2. Once paired, tap on menu in the Raptor app.
    3. Tap on Software Update and you will be able to view the current software version on your Raptor(s) and the Raptor App.
  • i-Pilot (Bluetooth)
    The current software version on your i-Pilot can be viewed from your remote or the Android or iOS phone app.
    • On your Remote
      1. On the main screen of the remote, use the down arrow until you can see System. Select it by pushing the Right Select button.
      2. Use the Down Arrow to scroll to About and select it with the OK button. You will then be able to view the current software version on your i-Pilot Controller and i-Pilot Remote.
    • On your Phone App
      1. Install the i-Pilot app on your iOS or Android phone and pair your phone Click here for information on installing the app on your phone (Android or iOS)
      2. Once paired, tap on menu in the i-Pilot app.
      3. Tap on Software Update and you will be able to view the current software version on your i-Pilot Controller, i-Pilot Remote and the i-Pilot App.
  • i-Pilot Link (non-Bluetooth)
    The current software version on your non-Bluetooth i-Pilot Link can be viewed from your remote.
    1. Use the down arrow use the down arrow until you can see Controls. 
    2. Select it by pressing the OK button.
    3. Scroll down to About and select it with the OK button and you will be able to view the current software version on your i-Pilot Link Controller and i-Pilot Link Remote. 

Resources

Was this article helpful?
51 out of 82 found this helpful

Articles in this section