Pairing your Bluetooth i-Pilot Link Remote

If you are pairing a new remote, you will want to ensure your remote and i-Pilot Link Controller are both Bluetooth. The Bluetooth i-Pilot Link Controller will have a "Pair" button. If your controller has a "Learn" button instead, you will want to follow the instructions for pairing a Legacy i-Pilot Link Remote. 

The remote will also need to be a Bluetooth i-Pilot Link Remote. If your remote looks differently from the image below, you will want click on the remote images at the bottom of the page for the correct instructions for pairing your remote.

To Pair your Remote

  1. Power on your motor
    • Ultrex- Press the power button on the foot pedal.
    • Ulterra and Riptide Ulterra- Press the power button on the base of the motor.
    • Terrova and Riptide Terrova- Press the power button on the base of the motor.
  2. Power on the remote by pressing the OK IPL-Ok.pngbutton in the top right corner of the keypad.
  3. Press the Home IPL-Home.pngbutton.
  4. Scroll through the Content Area using either your finger or the Screen Navigation IPL-Screen_Navigation.png button to find the System IPL-System.pngbutton.
  5. Select the System IPL-System.png button using either your finger or by pressing the Ok IPL-Ok.png button to open the System Menu.
  6. Once in the System Menu, scroll through to find the Pairing option.
  7. Before selecting the Pairing Option, locate the Pair Button on the top of the Control Head. Press and hold the Pair button. A consistent tone will be emitted from the Control Head.
  8. On the remote, select the Pairing IPL-Pairing.pngoption. The Remote will scan for the motor.
  9. Once successfully paired, 3 longer beeps will be emitted from the Control Head and the remote will be paired.


To Pair Other Controllers and Remotes

Click on the remote or controller below for pairing instructions

Was this article helpful?
5 out of 10 found this helpful

Articles in this section

See more