Pairing your Bluetooth i-Pilot Link Controller

The Bluetooth i-Pilot Link controller can be paired with the Bluetooth i-Pilot Link Remote, i-Pilot Link Phone App (iOS and Android) and the Bluetooth i-Pilot and i-Pilot Link Micro Remote. The Bluetooth i-Pilot Link has a Pair button. When the button is pressed and held, the Controller will make an audible tone and go into pairing. The Controller will automatically power on when the motor is powered on. 
BT_IPL_Controller.png

Pairing Bluetooth i-Pilot Link Remote

  1. Power on your motor
    • Ultrex- Press the power button on the foot pedal.
    • Ulterra and Riptide Ulterra- Press the power button on the base of the motor.
    • Terrova and Riptide Terrova- Press the power button on the base of the motor.
  2. Power on the remote by pressing the OKIPL-Ok.png button in the top right corner of the keypad.
    BT_IPL_Remote_OK_Button.png
  3. Press the Home IPL-Home.pngbutton.
  4. Scroll through the Content Area using either your finger or the Screen Navigation IPL-Screen_Navigation.png button to find the System IPL-System.pngbutton.
  5. Select the System IPL-System.png button using either your finger or by pressing the Ok IPL-Ok.png button to open the System Menu.
    BT_IPL_Pair_1C.png
  6. Once in the System Menu, scroll through to find the Pairing option.
    BT_IPL_Pair_2E.png
  7. Before selecting the Pairing Option, locate the Pair Button on the top of the Control Head. Press and hold the Pair button. A consistent tone will be emitted from the Control Head.
    BT_IPL_Pair_2D.png
  8. On the remote, select the Pairing IPL-Pairing.pngoption. The Remote will scan for the motor.
  9. Once successfully paired, 3 longer beeps will be emitted from the Control Head and the remote will be paired.

Pairing to the i-Pilot Phone App (iOS and Android)

  1. Download the i-Pilot Link app for iOS or the i-Pilot Link app for Android on your phone.
  2. On the device you intend to pair with the i-Pilot Link controller, turn Bluetooth "on".
  3. Locate the Pair button on the top of your Control Head. The Control Head contains the i-Pilot Link controller. Press and hold the Pair button. The Control Head will emit a continuous tone.
  4. While the Pair button is being held down, scan for the motor on your device. On the device, select the motor from the list of detected devices.
  5. Once the device is paired with the motor, the Control Head will emit 3 longer beeps. Once you hear the beeps, the motor was successfully paired and you can stop pressing the Pair button.
  6. Once the device is paired with the motor, and they are connected, the buttons on the Home screen will be blue. If they are not communicating, the buttons will stay deactivated.mceclip0.png

Pairing to the Bluetooth i-Pilot and i-Pilot Link Micro Remote

  1. Power on your motor
    • Ultrex- Press the power button on the foot pedal.
    • Ulterra and Riptide Ulterra- Press the power button on the base of the motor.
    • Terrova and Riptide Terrova- Press the power button on the base of the motor.
  2. Locate the Pair Button at the top of the Control Head.
  3. Push and hold the Pair Button down. A consistent tone will be emitted from the Control Head.
  4. While holding the Pair Button on the Control Head, push and hold the High Speed Bypass and AutoPilot keys on the remote simultaneously.
    Bluetooth_i-Pilot_and_i-Pilot_Link_Micro_Remote_HSB_and_AP.png
  5. Once successfully paired, 3 longer beeps will be emitted from the Control Head and the remote will be paired.

Resources

To Pair Other Controllers and Remotes

Click on the remote or controller below for pairing instructions

Was this article helpful?
1 out of 1 found this helpful

Articles in this section

See more