Pairing your Bluetooth i-Pilot Link Controller to the Mobile App and Remotes (2017-2023)

The Bluetooth i-Pilot Link controller can be paired with the Bluetooth i-Pilot Link Remote, i-Pilot Link Phone App (iOS and Android) and the Bluetooth i-Pilot and i-Pilot Link Micro Remote. The Bluetooth i-Pilot Link has a Pair button. When the button is pressed and held, the Controller will make an audible tone and go into pairing. The Controller will automatically power on when the motor is powered on.
BT_IPL_Controller.png

  1. Power on your motor
    • Ultrex- Press the power button on the foot pedal.
    • Ulterra and Riptide Ulterra- Press the power button on the base of the motor.
    • Terrova and Riptide Terrova- Press the power button on the base of the motor.
  2. Power on the remote by pressing the OK button in the top right corner of the keypad.
    BT_IPL_Remote_OK_Button.png
  3. Press the Home button.
  4. Scroll through the Content Area using either your finger or the Screen Navigation button to find the System button.
  5. Select the System button using either your finger or by pressing the Ok button to open the System Menu.
    BT_IPL_Pair_1C.png
  6. Once in the System Menu, scroll through to find the Pairing option.
    BT_IPL_Pair_2E.png
  7. Before selecting the Pairing Option, locate the Pair Button on the top of the Control Head. Press and hold the Pair button. A continuous tone will be emitted from the Control Head. You will need to press and hold the Pair button until the motor is fully paired. The continuous tone will change to 3 beeps when pairing is complete. 
    BT_IPL_Pair_2D.png
  8. On the remote, select the Pairing option. The Remote will scan for the motor.
  9. Once successfully paired, 3 longer beeps will be emitted from the Control Head and the remote will be paired.
  1. Download the i-Pilot Link app for iOS or the i-Pilot Link app for Android on your phone.
  2. On the phone you intend to pair with the i-Pilot Link controller, turn Bluetooth "on".
  3. Locate the Pair button on the top of your Control Head. The Control Head contains the i-Pilot Link controller. Press and hold the Pair button. The Control Head will emit a continuous tone.
  4. While the Pair button is being held down, scan for the motor on your phone. On the phone, select the motor from the list of detected devices.
  5. Once the phone is paired with the motor, the Control Head will emit 3 longer beeps. Once you hear the beeps, the motor was successfully paired and you can stop pressing the Pair button.
  6. Once the phone is paired with the motor, and they are connected, the buttons on the Home screen will be blue. If they are not communicating, the buttons will stay deactivated.
    mceclip0.png
  1. Power on your motor
    • Ultrex- Press the power button on the foot pedal.
    • Ulterra and Riptide Ulterra- Press the power button on the base of the motor.
    • Terrova and Riptide Terrova- Press the power button on the base of the motor.
  2. Locate the Pair Button at the top of the Control Head.
  3. Push and hold the Pair Button down. A consistent tone will be emitted from the Control Head.
  4. While holding the Pair Button on the Control Head, push and hold the High Speed Bypass and AutoPilot keys on the remote simultaneously.
    Bluetooth_i-Pilot_and_i-Pilot_Link_Micro_Remote_HSB_and_AP.png
  5. Once successfully paired, 3 longer beeps will be emitted from the Control Head and the remote will be paired.

Manual and Guide

Was this article helpful?
22 out of 34 found this helpful

Articles in this section

See more