Talon Fuses (2011-present)

All Talons use a 30 amp fuse to protect them from power surges. The type of fuse depends on the Talon.

Two Stage Talons (6' & 8'): Yes, the Talon has an in-line 30A blade style fuse. These can be purchased at any automotive parts store.

Three Stage Talons (8', 10', 12'): Yes, the Talon has an in-line 30A re-settable blade style fuse. These are part number 2378231 and can purchased directly from Minn Kota by ordering online here, contacting your local Authorized Service Center

Resetting the Bluetooth Talon Fuse

In the event that you need to reset the factory installed 30 amp Fuse, follow the instruction below. The fuse should be located no more that 7 inches from the Positive Battery terminal on the Positive Lead (+). If an alternate Fuse is installed, please refer to directions by your Fuse manufacturer to correctly reset it.

  1. Remove the protective cover from the Fuse Assembly, exposing the 30 amp Fuse.
    BT_Talon-_Reset_Fuse_1A.png
  2. Reset the Fuse by pushing the Breaker Button to engage the Fuse.
    BT_Talon-_Reset_Fuse_1B.png
  3. Ensure that the Seal is in place, and replace the protective housing on the Fuse Assembly. Make sure that the Cover snaps together to provide a watertight seal.
    BT_Talon-_Reset_Fuse_1C.png

Resources

TALON MANUALS: 3-STAGE MODELS
For 8', 10', 12', and 15' three-stage models manufactured 2018-present (Bluetooth® compatible)

TALON MANUALS: 3-STAGE MODELS
For 8', 10', and 12', three-stage models manufactured 2014-2017 (not Bluetooth® compatible)

TALON MANUALS: 2-STAGE MODELS
for 6' and 8' two-stage models manufactured 2011-2013 (not Bluetooth® compatible)

Was this article helpful?

We're sorry to hear that.

Please tell us why.

11 out of 11 found this helpful

Articles in this section

See more