Powering your i-Pilot or i-Pilot Link Remote On and Off (Bluetooth and Legacy Remotes (2007-2023))

Updated October 16, 2023 19:23

The instructions below will walk you through turning your Bluetooth or Legacy i-Pilot and i-Pilot Link remote on and off.

To Power the remote on, press any button. The icons on the screen will light up. If the all of the icons appear and then turn off after 3 seconds, the remote is not able to communicate with the motor. Make sure the motor is powered on. If your motor is powered on, you can try pairing the remote to the motor with the link below.
To Power Off the remote, press and hold the Record/Pause button for 3 seconds. The remote will automatically turn itself off thirty minutes after the last button press if a learned i-Pilot controller is powered up and within transmitting range. The remote will turn off after three seconds if the i-Pilot controller is powered down or out of transmitting range.