Built with an intuitive, easy-to-use design, this Riptide Transom model delivers a wide range of power options and precision maneuverability. With unmatched corrosion protection, Riptide Transom means fish are out of places to hide.
Click here for purchase options for the Riptide Transom
Jump to:
Features
- Lever Lock Bracket- This solid 10-position bracket features a quick-release lever lock and reinforced composite material that resists flexing, warping, and UV damage.
- Tilt/Extend Tiller- Take command of your hand control trolling motor with this versatile tiller, which both tilts (up to 45°) and extends (up to 6"), and features a digital battery indicator on the head. (tilt only available on specific models where indicated)
- Digital Maximizer Options- Choose between 5 Speed or Variable Speed motors with Digital Maximizer.
- Advanced Corrosion Protection- Riptide® motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection.
- Push-to-Test Battery Meter- Press a button on the trolling motor head to get an instant status of battery life you have left.
- Indestructible Composite Shaft — Guaranteed for Life: At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
- Prop- Power Prop and Weedless Wedge Prop options available.
Specifications
-
Available Thrust and Voltage Options
- The Riptide Transom is available in 12 volt 45 lbs. and 55 lbs. thrust. Riptide Transom is also offered in 24 volt 80 lbs. thrust and 36 volt 112 lbs. thrust options.
-
Available Shaft Lengths
- The Riptide Transom is available in shaft lengths of 36", 42", and 52". The shaft on the Riptide Transom cannot be lengthened as it would be cost prohibitive. The shaft can be shortened. If the shaft is shortened at an Authorized Service Center, it will not void your warranty. If the shaft is shortened outside of an Authorized Service Center, the warranty will be voided.
-
Motor Control Options
- The Riptide Transom is controlled with a hand-tiller.
- Shipping Weight
The weight of the Riptide Transom can vary based on the shaft length and thrust. The Shipping weights are listed below.
-
-
12 Volts
- Riptide Transom, 45 lbs. thrust, 36 inch shaft-24 lbs.
- Riptide Transom, 55 lbs. thrust, 36 inch shaft- 27 lbs
- Riptide Transom, 55 lbs. thrust, 42 inch shaft-27.6 lbs.
-
24 Volts
- Riptide Transom, 80 lbs. thrust, 42 inch shaft-42 lbs.
-
36 Volts
- Riptide Transom, 112 lbs. thrust, 52 inch shaft- 53lbs.
-
12 Volts
-
Mounting
- All Riptide Transom motors have a clamp-on mount that secures to the transom of your boat.
