MEGA Live 1 and MEGA 360 can be used together. MEGA 360 can be in-view on one unit while MEGA Live 1 is in-view on a different unit, but the following conditions exist:
| Model | Condition |
| HELIX | Mega Live 1 and Mega 360 cannot be displayed on the same view |
| On all systems, MEGA 360 can be in-view on one unit while MEGA Live 1 is in-view on a different unit. | |
| Model | Condition |
| APEX, XPLORE, SOLIX | Mega Live 1 and Mega 360 can be displayed on the same view |
| On all systems, MEGA 360 can be in-view on one unit while MEGA Live 1 is in-view on a different unit. | |
MEGA Live 2 and MEGA 360 can be used together. But the following conditions exist:
| Model | Condition |
| APEX, XPLORE, SOLIX | Mega Live 2 and Mega 360 can be displayed on the same view |
| On all systems, MEGA 360 can be in-view on one unit while MEGA Live 1 is in-view on a different unit. | |
It is possible that you will see interference (talk or noise) between the two products. We recommend the following:
- Most Important: All units on the boat must be on the same Ethernet Network.
- The Interference Rejection/Avoidance feature in the MEGA Live 1 should be On. The options are: Off, Low, Medium and High. We recommend that the menu be set to Low. Low is the default setting. Mega Live 2 does not have an Interference Rejection/Avoidance setting.
- On HELIX this setting is in the Accessories Tab under Mega Live.
- On XPLORE/SOLIX/APEX this menu is in the Main Sonar Menu under Home/Settings/Sonar.
Moving cables, changing the 2D noise filter or changing frequencies will not be effective for this issue.
