Pairing Advanced GPS Wireless and Micro Remotes (2023–Present)

Learn how to pair an Advanced GPS Wireless Remote or Micro Remote with your Minn Kota trolling motor. Follow the pairing instructions to connect your remote and get it ready to control your Advanced GPS Navigation system.

Jump to:

Pairing the Advanced GPS Wireless Remote

The Advanced GPS Navigation controller in the trolling motor Control Head may pair up to three remotes. These three remotes can be a combination of the standard Wireless Remotes and Micro Remotes. In addition, the controller can be paired to one mobile device for the Minn Kota Fishing Application. If the trolling motor has Advanced GPS Navigation, it can use the Minn Kota Fishing Application.

  1. Press the Menu button.
  2. Use the Speed Up or Speed Down button to find Bluetooth. Use the Steer Right button to select Bluetooth.
    Pair the remote 1b.png
  3. In the Bluetooth Menu, use the Speed Up or Speed Down button to find Pair Remote. Press the Steer Right button to select Press the Steer Right button to select Pair Remote.
    Notice- make sure the remote.png
    Pair the remote 1c.png
  4. To pair the Wireless Remote to the trolling motor, enable Pairing Mode on the trolling motor. Press and hold the Pair button on the trolling motor's control head. The trolling motor will emit a continuous tone while in Pairing Mode.
    Pair the remote 2d.png
  5. On the remote, use the Steer Right button to select Pair to Motor. The remote will scan for the motor. Continue to hold the Pair button on the trolling motor during this process.
    Pair the remote 2e.png
  6. If successfully paired, the trolling motor will emit three beeps and the remote will be paired. The Pair button may be released.
  7. If 30 seconds pass while in Pairing Mode and the pair is not successful, an error tone will sound from the trolling motor, signaling that the pairing has timed out. If unsuccessful, repeat the process.
  8. When complete, press and hold the Menu button to return to the Dashboard

Pairing the Advanced GPS Micro Remote

  1. Power on the trolling motor:
    • Ultrex and Ultrex QUEST: Press the Power button on the foot pedal.
    • Ulterra and Ulterra QUEST: Press the Power button on the base of the motor.
    • Riptide Insticnt QUEST: Press the Power button on the base of the motor.
    • Terrova, Riptide Terrova, Terrova QUEST, and Riptide Terrova QUEST: Press the Power button on the base of the motor.
    • PowerDrive and Riptide PowerDrive: Deploy the motor.
  2. Locate the Pair button on top of the control head. 
  3. Press and hold the Pair button. The control head will emit a steady tone.
  4. While continuing to hold the Pair button, press and hold the High Speed Bypass and AutoPilot buttons on the remote at the same time.

    Micro icons.png
  5. Listen for three long beeps from the control head. The beeps confirm that the remote is successfully paired.
     
Was this article helpful?
0 out of 0 found this helpful

Articles in this section