Use this guide to replace and install the 5-speed switch on compatible 5-speed trolling motors from 1998 to present. It includes the tools, replacement switch part numbers, and basic wiring information needed for installation.
Jump To
Tools Needed
Before beginning the installation, have the following tools available:
- #2 Phillips screwdriver
- Needle-nose pliers
Replacement Switch Part Numbers
Select the replacement switch based on whether your trolling motor is hand controlled or foot controlled.
Hand-Controlled Trolling Motors
- 5-Speed Switch
- Part Number: 2064028
- 5-Speed Switch, Part Number 2064028
Foot-Controlled Trolling Motors
- 5-Speed Switch
- Part Number: 2884026
- 5-Speed Switch, Part Number 2884026
5-Speed Switch Wiring
Connect the power leads and motor wires to the appropriate terminals on the replacement switch.
- Locate the labeled terminals on the 5-speed switch.
- Match each power lead and motor wire to its appropriate labeled terminal.
- Connect each wire to the corresponding terminal.
- Check each connection to make sure the wires are installed on the correct terminals and are secure.
