Video Guide: Minn Kota Ulterra and Riptide Ulterra Prop and Steering is Locked (DOES NOT INCLUDE ULTERRA QUEST) (2015-present)

If your Minn Kota Ulterra or Riptide Ulterra motor is deployed with the motor lower unit less than 14-15 inches below the aluminum base extrusion, it will not steer in either direction and the motor lower unit will not run. This feature is used to eliminate the chance of the motor lower unit or prop contact the boat hull. Simply trim your motor out of the lockout region and the motor will begin to work.

Click here to find an Authorized Minn Kota Service provider

Was this article helpful?
5 out of 26 found this helpful

Articles in this section

See more