1. Minn Kota
  2. Trolling Motors
  3. Cable Steer Motors
  4. Edge and Riptide Edge

Edge and Riptide Edge Features, Specifications and Manual (2006-present)

Updated

Don't let the size fool you. Edge's compact mount is built with extruded, anodized aluminum for rugged, no-nonsense strength. Add a rock-solid Latch & Door mount and an impact resistant composite head, and you have a motor that's perfect for smaller boats and big days on the water.

Click here for purchase options for the Edge

For assistance in selecting the best trolling motor for you, click on the Trolling Motor Selection Guide below.

Jump To:

Features

  • Latch & Door Bracket
    • This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day.
  • Heel-Toe / Cable-Steer Foot Pedal
    • Get heel/toe control of your motor with this ultra-responsive foot pedal that includes speed control, and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability.
  • 5-Speed Settings
    • Choose from five speed settings to dial in the right speed control when you're trolling.
  • Directional Indicator
    • Easy-to-read directional indicator is built into the top of the trolling motor head on Edge foot control models.
  • Cool, Quiet Power
    • Every Minn Kota lower unit runs cool to extend trolling motor life, and stays quiet.
  • Indestructible Composite Shaft
    • At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and we guarantee it for life.
  • Power Prop
    • For 3-1/4" motor diameters, this prop delivers extra power to push through heavy vegetation. Includes prop pin, nut and washer.

Specifications

  • Available Thrust and Voltage Options
    • The Edge is available in 45 lbs, 55 lbs, and 70 lbs of thrust. The 45 lb and 55 lb thrust motors are 12 volts. The 70 lb thrust Edge is a 24 volt motor. We do not offer a 36 volt Edge.
  • Available Shaft Lengths
    • The Edge is available in shaft lengths of 36", 45", and 52". The shaft on the Edge cannot be lengthened as it would be cost prohibitive. The shaft can be shortened. If the shaft is shortened at an Authorized Service Center, it will not void your warranty. If the shaft is shortened outside of an Authorized Service Center, the warranty will be voided.
  • Motor Control Options
    • The Edge is available with a hand-tiller or a foot pedal.
  • Mounting Holes
    • All Edges have the same mounting hole patterns as our cable-steer motors for easy interchangeability between cable-steer trolling motors.
  • Shipping Weight
    • The weight of the Edge can vary based on the shaft length, thrust, and if the motor is hand or foot controlled. The shipping weights are listed below.

Edge (brushed motor)

Item Number Controller Thrust Speed Mount Shaft Length Shipping Weight
1355935 Hand-Control 45 lbs. 5-Speed Latch & Door 45" shaft 41 lbs.
1355946 Foot Pedal 45 lbs. 5-Speed Latch & Door 36" shaft 43 lbs.
1355947 Foot Pedal 45 lbs. 5-Speed Latch & Door 45" shaft 45 lbs.
1355963 Hand-Control 55 lbs. 5-Speed Latch & Door 52" shaft 45 lbs.
1355956 Foot Pedal 55 lbs. 5-Speed Latch & Door 45" shaft 48 lbs.
1355957 Foot Pedal 55 lbs. 5-Speed Latch & Door 52" shaft 53 lbs.
1355970 Foot Pedal 70 lbs. 5-Speed Latch & Door 45" shaft 49 lbs.
1355971 Foot Pedal 70 lbs. 5-Speed Latch & Door 52" shaft 55 lbs.

Manuals

Was this article helpful?
27 out of 73 found this helpful

Articles in this section