Video Guide: How to Install a Minn Kota Legacy i-Pilot System on a PowerDrive V2 (2007-2016)

This video will show you how to install an i-Pilot GPS Trolling System accessory on a PowerDrive V2 trolling motor.

PLEASE NOTE: This tutorial is for systems and motors manufactured prior to 2017 (not Bluetooth compatible).

Key times in the video

  • 0:28 Disconnect all power to the trolling motor
  • 1:00 Remove the control box cover and side plates
  • 2:03 Install the new grommet
  • 4:13 Position the heat shrink over one of the connectors

Was this article helpful?
14 out of 20 found this helpful

Articles in this section