Reset the Fuse on a Bluetooth Talon

In the event that you need to reset the factory installed 30 amp Fuse, follow the instruction below. The fuse should be located no more that 7 inches from the Positive Battery terminal on the Positive Lead (+). If an alternate Fuse is installed, please refer to directions by your Fuse manufacturer to correctly reset it.

  1. Remove the protective cover from the Fuse Assembly, exposing the 30 amp Fuse.
    BT_Talon-_Reset_Fuse_1A.png
  2. Reset the Fuse by pushing the Breaker Button to engage the Fuse.
    BT_Talon-_Reset_Fuse_1B.png
  3. Ensure that the Seal is in place, and replace the protective housing on the Fuse Assembly. Make sure that the Cover snaps together to provide a watertight seal.
    BT_Talon-_Reset_Fuse_1C.png

Resources

Was this article helpful?
0 out of 0 found this helpful

Articles in this section

See more