Installing Belleville Washers

Some motors use Belleville Washers in the lower unit. Follow the steps below to replace them if needed. 

  1. Lay washers in the plain end housing pocket as shown. NOTE: Washers have a slight arc; orient them so the high sides are together.
    Notice-_Belleville_Washers.png
  2. Apply a small amount of grease to keep the washers in place during assembly.

Belleville_Washer_Install.png

Was this article helpful?

We're sorry to hear that.

Please tell us why.

15 out of 17 found this helpful

Articles in this section

See more